BETONHEX FC120

Fiber-reinforced cementitious skimming plaster for boards in dry exterior systems

Technical data sheet
Safety data sheet
Request Information

BETONHEX FC120

characteristics

Powder skimming plaster with good adhesion to fiber cement, concrete, plaster, masonry, and old coatings, as well as good adhesion to gypsum-based exterior boards reinforced with fiberglass mesh and low water absorption. Its pasty consistency allows for application without dripping or detachment. It is applied in thicknesses from 1 to 5 mm. Absence of shrinkage cracks; can be applied with plastering machines.

CODE10.P71

Request Information

Related products

UNIGRIP

covering primer and adhesion promoter formulated with special copolymers in aqueous emulsion, selected pigments, micronized fillers and specific additives that give it the following characteristics: excellent adhesion to the substrate, ease of application, good resistance to water and aging, excellent resistance to atmospheric agents and smog, overcoatable. The use of biocides with specific active ingredients makes the product resistant to the proliferation of algae and mold.

SILOXANE COATING V1

product based on siloxane resins in aqueous dispersion designed for high-resistance painting cycles. The special formulation gives the product the following characteristics: high breathability (class V1 - high), high adhesion to the substrate, high water repellency, low water absorption, high color stability, excellent resistance to alkalis, industrial and urban smog and salt spray.

RASHEX K8 WHITE 1.2

Powder adhesive/skimming coat based on cements, selected mineral fillers, polymer fibers, specific additives, and unsaponifiable resins. The presence of fibers reduces shrinkage phenomena and increases the dimensional stability of the substrate, preventing the formation of hairline cracks.

RASHEX K8 GRUND 1.2

Adhesive/leveling compound in powder form based on cements, selected mineral fillers, polymeric fibers, specific additives and non-saponifiable resins. The presence of fibers reduces shrinkage phenomena and increases the dimensional stability of the substrate, preventing the formation of cracks.

POKER MAT

A product featuring a remarkable aesthetic and protective effect, excellent coverage, excellent resistance to light and atmospheric agents, good breathability, and excellent adhesion to the substrate. Its formulation prevents the growth of mold, fungi, moss, and algae.

POKER LUX

A gloss finish product formulated with siloxane resins, styrene-acrylic resins in aqueous dispersion, titanium dioxide, pure pigments, selected fillers, and high-quality additives that provide the following characteristics: excellent resistance to alkalis, weathering, and atmospheric agents, high adhesion to the substrate, self-cleaning properties, good water vapor permeability, good water repellency, and low water absorption.

MALTHEX HR200 PLUS

Premixed mortar in powder form, composed of cement, selected aggregates and special additives for shrinkage control and to obtain excellent adhesion, durability and resistance. The special formulation, combined with the use of specific additives, gives the product a high passivating power that prevents corrosion of steel reinforcement in concrete.

MALTHEX HR20 CEM

Single-component structural mortar with coarse grain formulated with cement, natural aggregates and specific additives. It is a product with good breathability, low elastic modulus, excellent workability, reduced shrinkage and good adhesion to the substrate. The presence of fibers reduces shrinkage phenomena and increases the dimensional stability of the substrate, preventing the formation of cracks.

MALTHEX HR15 NHL

Single-component structural mortar formulated with NHL natural hydraulic lime, natural aggregates, and specific additives. The product features high breathability, a low elastic modulus, excellent workability, reduced shrinkage, and good adhesion to the substrate.

Other products

Agua Renowa

two-component enamel formulated with special acrylic resins in aqueous emulsion, featuring excellent adhesion, high hardness, good abrasion resistance, good chemical resistance (water, oil, alcohol, detergents, alkaline solutions), excellent washability, ease of application.

FONDO STILI DI VERTIGO TermocoatHEX

textured primer formulated with acrylic-siloxane resins in aqueous emulsion, marble aggregates of various grain sizes and various quality additives that give it the following characteristics: plasticity, breathability, high filling power, water repellency, alkali stability, excellent adhesion to the substrate.

PROOFHEX G/M

smoothing plaster formulated with Portland Cement 525R, selected mineral aggregates and special additives. The properties that characterize the product are as follows: excellent adhesion, strong waterproofing action, good breathability and high restorative and protective action. It also features excellent resistance to atmospheric agents, good filling power and great ease of application. Discover all professional waterproofing solutions

FIBROGUM

thick elastic coating formulated with styrene-acrylic copolymers and various high-quality additives that provide the following properties: good resistance to aging, good resistance to atmospheric agents and smog, insensitivity to thermal shocks, good elongation, suitable for both marine and mountain climates. Discover all professional waterproofing solutions

SILOGUMMHEX FIBER-REINFORCED

continuous waterproof membrane, single-component, fiber-reinforced, formulated with special acrylic copolymers in aqueous emulsion, resistant pigments and various quality additives that give it the following properties: good resistance to aging, excellent resistance to atmospheric agents and smog, excellent resistance to water stagnation, insensitivity to thermal shocks and UV rays, good elongation, suitable for both marine and mountain climates, walkable. Discover all professional waterproofing solutions

TERMOCOATHEX HS COAT

Coating formulated with acrylic-siloxane resins in aqueous dispersion, selected lamellar fillers, marble aggregates, light-resistant pigments and various additives that give it the following properties: insensitivity to thermal shock, high elongation, high water vapor permeability, good resistance to aging, atmospheric agents and smog, low dirt retention, high adhesion to the substrate, very low water absorption.

D1000 Algadefend Concentrate

product suitable for preventing the formation of mold, moss and algae. D100 ALGADEFEND CONCENTRATE must be added to products used for exterior painting, providing them with an effective protective action against the proliferation of mold, moss and algae.

RASHEX FR125 HYDRO

finishing plaster composed of Portland cement, hydrated lime, selected aggregates, water-repellent agents, and special additives to achieve excellent adhesion and workability
masterwood impregnante

Masterwood Impregnante

water-based impregnating agent suitable for wood protection. It regulates moisture exchange between wood and air as it does not occlude the wood pores, protects the wood in depth and offers high resistance to weathering and microorganisms.

Discover all professional solutions for wood