MALTHEX HR200 PLUS

Fiber-reinforced thixotropic passivating mortar with controlled shrinkage

Technical data sheet
Safety data sheet
Request Information

MALTHEX HR200 PLUS

CHARACTERISTICS

Premixed mortar in powder form, composed of cement, selected aggregates and special additives for shrinkage control and to obtain excellent adhesion, durability and resistance. The special formulation, combined with the use of specific additives, gives the product a high passivating power that prevents corrosion of steel reinforcement in concrete.

CODE10.P87A

Request Information

Related products

UNIGRIP

covering primer and adhesion promoter formulated with special copolymers in aqueous emulsion, selected pigments, micronized fillers and specific additives that give it the following characteristics: excellent adhesion to the substrate, ease of application, good resistance to water and aging, excellent resistance to atmospheric agents and smog, overcoatable. The use of biocides with specific active ingredients makes the product resistant to the proliferation of algae and mold.

MALTHEX HR20 CEM

Single-component structural mortar with coarse grain formulated with cement, natural aggregates and specific additives. It is a product with good breathability, low elastic modulus, excellent workability, reduced shrinkage and good adhesion to the substrate. The presence of fibers reduces shrinkage phenomena and increases the dimensional stability of the substrate, preventing the formation of cracks.

MALTHEX HR15 NHL

Single-component structural mortar formulated with NHL natural hydraulic lime, natural aggregates, and specific additives. The product features high breathability, a low elastic modulus, excellent workability, reduced shrinkage, and good adhesion to the substrate.

RESINPLAST

synthetic latex with good compatibility with inorganic binders such as lime and cement. When mixed with mortar, it provides the following properties: greater adhesive power, better resistance to chemicals and freeze-thaw cycles, reduced permeability of concrete to solvent oils, greater elasticity, lower hydraulic shrinkage.

Ferrhex

product formulated with polymers in aqueous dispersion, cementitious binders and corrosion inhibitors. It adheres perfectly to the substrate, prevents oxidation of the metal surface and forms a layer impermeable to water and aggressive gases present in the atmosphere.

Elasthex

Two-component cementitious waterproofing mortar with high elasticity, formulated with hydraulic binders, selected mineral aggregates, special additives and synthetic polymers in aqueous dispersion that improve the workability, adhesion and flexibility of the mortar. Elasthex maintains its elasticity unchanged in all environmental conditions, even at very low temperatures. Discover all professional waterproofing solutions

Flexocote

single-component fiber-reinforced waterproofing mortar, composed of Portland cement, special alkali-resistant polymers, selected aggregates, and specific additives that provide the following characteristics: waterproofing, high elasticity, excellent adhesion, excellent workability and ease of application, exceptional yield, good UV resistance, and resistance to freeze-thaw cycles. Discover all professional waterproofing solutions

MALTHEX HR60

Thixotropic, fast-setting, fiber-reinforced repair mortar based on cements, selected aggregates, and special additives for shrinkage control and to achieve excellent adhesion, durability, and strength. The hardened product possesses high mechanical strengths, excellent adhesion to concrete, excellent resistance to chemical attacks and atmospheric pollutants, high water impermeability, and excellent resistance to carbonation.

MALTHEX HR500 FAST

premixed powder mortar, composed of cement, selected aggregates and special additives for shrinkage control and to obtain excellent adhesion, durability and workability. Once the product is mixed with water, a thixotropic mortar is obtained, highly adhesive to concrete, brick, plaster and iron, suitable for repairs, restorations and coatings, without shrinkage and with very rapid setting.

Other products

RASHEX FR1 GRUND

Finishing plaster composed of Portland cement, hydrated lime, selected aggregates and special additives to obtain excellent adhesion and workability.

X-ONE

water-based paint for interiors with the following features: excellent covering power, high water vapor permeability, good white point, high yield, good spreadability and brushability, ease of application, delicate citrus essence fragrance. The high breathability of X-One promotes the natural passage of vapor through the walls, allowing it to migrate from the inside to the outside and thus preventing condensation formation.

Grip promoter additive

Special additive to be added to certain types of water-based paints before application, to increase their adhesion on various types of substrates. The paint/coating with GRIP PROMOTER ADDITIVE chemically bonds to both inorganic materials (e.g. glass, metals, ceramics, cement) and organic materials (e.g. acrylic, epoxy, polyurethane enamels, wood).

Uniforma S

An opaque product based on GOOD YEAR'S PLIOLITE® resin, characterized by strong anchoring power. It also consolidates and evens out the absorption of substrates, ensuring optimal adhesion and homogeneity of color and coverage for finishing paints and coatings.

ADHESIVE-LEVELING COMPOUND TermocoatHEX

powder adhesive-leveling compound based on cements, selected mineral fillers, polymeric fibers, specific additives and non-saponifiable resins. The presence of fibers reduces shrinkage phenomena and increases the dimensional stability of the substrate, preventing the formation of crazing.

Biodefend Pro Water-Based Enamel

Water-dilutable acrylic wall enamel for interiors, formulated with acrylic copolymers in aqueous emulsion, pure pigments, thickeners, coalescents, and various high-quality additives that provide the following characteristics: excellent coverage - exceptional washability - excellent adhesion even on difficult substrates - low dirt pick-up - stain-resistant - non-flammable. Discover all professional solutions against mold

TERMOCOATHEX HS FOND

Filling and leveling primer formulated with elastomeric acrylic-siloxane resins, light and weather-resistant pigments, selected fillers of various grain sizes and various quality additives that give it the following characteristics: high elasticity, good water vapor permeability, good filling and leveling power, high coverage, excellent adhesion, excellent anchoring power for subsequent layers, insensitivity to thermal shock

Super-covering concrete paint

protective coating formulated with acrylic resins in aqueous emulsion, inorganic pigments, lamellar fillers, silica and various quality additives that give it the following properties: good elasticity, good breathability, excellent protection, excellent consolidating power, excellent covering and leveling power.

RASHEX K8 GRUND 1.2

Adhesive/leveling compound in powder form based on cements, selected mineral fillers, polymeric fibers, specific additives and non-saponifiable resins. The presence of fibers reduces shrinkage phenomena and increases the dimensional stability of the substrate, preventing the formation of cracks.